Cheap Bosch 4410 Bosch 4410 10-Inch Dual-Bevel Sliding Compound Miter Saw

If you're like me, you need a lot of research before buying a product of organs.

Let me start by saying this, I am a carpenter for over 20 years, and I used lots of power tools in my time. I would like a product of Milwaukee click on all the others. I bought a good amount of tools from Bosch in recent years, and my choice was varied from Milwaukee to Bosch. Do not get me wrong, it makes fabulous Milwaukee Electric Tools, robust and reliable, but the tools Iacquired by Bosch seem to be the same quality that I liked from Milwaukee, but have other ideas and share in shaping their own tools.

This visa was perfect right out of the box. I went to calibrate, and everything that was right for the money, bevels, miters and straight cuts. The design is soooo sweet! The lock is very blunt front, where it should be, and not behind the saw are like everyone else. Have well-placed buttons for its realization it was necessarythe back of the saw in a vain refuge where are the other brands to block the ramp. I like to refine the development of a miter angle, if I need an angle near normal. The extension is built into the arms of a great feature that other manufacturers buy separate (although there is a long roller for cutting wood or need to be cut) and the angle, I can read more than 45 degrees, located on most, Saws (50 degrees to the left to make miter, miter 60 degrees to the right, 47Degrees to the left of the cone, and 46 + degrees to the right bevel). The clamp piece is one of the best I've seen another site mitersaw job I have ever used. The only thing I saw was this, that if you set the ramp on the right side exceeds 30 degrees, the saw does not cut all the way through the wood or cut if you put some wood waste after 2by, what is is cutting the tin belt drive hit the wall, even if the fence in place. Of course, if someone knowsCutting miters and bevels on a bevel saw, all miters and bevels can be avoided, on the left side of the saw to be easily realized with 2by wood under the piece. Those unfamiliar with this method of practice …. Man, I first had a dual-bevel saw). (It's a bit 'of a disadvantage, at times, but not difficult to reach.)

Still, these prices saw 5 stars in my book. This visa should ANY convinced that you buy. Take it from me, Big D.
<br/>

Best saw ever. – David M. Johnson – CT
This is my third miter saw … the first slide. This is a precision device and is very good and precise enough to make furniture. I'm just a weekend warrior, but of lower quality have dealt with various saws. This one takes the cake of security.

Not a professional tool – C. L. Moore – Houston, TX United States
This visa is not a good tool in my opinion. It has some good ideas, but not well implemented. First, it is too bulky for a 10 "saw. Secondly, I find that not too much grip and controlled intuative a chamfer. Thirdly, I was very surprised and impressed by the" Laser "- it is a battery Laser disk, just like you can add all video – available at Home Depot. Other than that, make your line of 1 / 32 "from the actual cutting. Hitachi has seen my laser has its own built in,Fully adjustable on both sides of the blade, and is easy to set exactly. It's also, without the rotating blade, to select a board at any angle and can match the angle of the blade seemed perfect. With the Bosch, both for the work of the sawmill, as the laser. Fourth, the saw moving too much when the railway is extended to the end (even with a very good blade, the blade that comes with the saw must be recycled before use!). I lost more than 600Dollars for the visa, which for almost half the cost of a Kapex Festool would be paid – the only really good miter saw out there. Do not waste your money on this wood if it can not afford to stick with the best next Festool – Hitachi.

Special Offer @ Amazon Check Price Now !

Features

  • Up Front bevel lock lever and range selector knob 8212; Easily-accessed controls for quick and accurate bevel settings
  • Microfine miter adjustment knob 8212; for fine adjustment of key (detent) miter angles by up to 2-Degree, left or right
  • Multi-positioned main handle 8212; Easily locks into any of four positions for optimum comfort and control
  • Large 21-Inch aluminum base with cast sliding extensions for 37-1/4-Inch total length 8212; Provides extended grip areas and extra support for longer materials
  • Crown miter detents 8212; 31.6-Degree miter and 33.9-Degree bevel detents for quick, accurate crown cuts

Overviews

Includes 10″ Dual-Bevel Slide Miter Saw – 4410, Premium 60-Tooth Thin-Kerf Carbide-Tipped Blade, Wrench Set, Tool-Free Verticle Work Clamp – MS1226, Dust Bag – MS1225

Specifications

This might just be the perfect miter saw, packed with everything you ever wished for and then some. Of course, a saw’s nothing if it’s not accurate, but the Bosch 4410 is dead-on right from the box. Of all its great features, our favorite by far is the four-position handle. Like a vertical grip? You’ve got it. Horizontal? That too. In a stroke of engineering genius, Bosch designed the handle to convert easily to the grip that suits you best, a feature so desirable that we bet it will start appearing on other brands. Our usual complaint about miter saws is that the fence is too low, and Bosch has addressed that with nice 4-1/2 inch tall Speed Track sliding fences, making any bevel setup and crown molding cut a cinch. Yet another change we appreciated was the relocation of the bevel lever and adjustment knob right up in front where you need it. Speaking of bevels, you’ve got a complete range on both left and right, at 47 and 46 degrees respectively. The miter detent system is super accurate, but sometimes the rest of the world isn’t perfect and a 45-degree miter might not be what you need. No problem. Override the detent and sneak up on the cut with the superb micro-fine adjustment, even on a long workpiece, thanks to the sliding base extensions and handy tool-free clamping levers. It always irritates us when we can’t read the numbers on a tool, and even that complaint is taken care of with the easy-to-see scale for both the bevels and miters. Last but far from least, this saw is powered by a 3 hp max, 15-amp motor that runs the blade through oak like butter. Even the included blade is high quality and leaves a flawless cut line. A beautiful machine.–Kris Jensen-Van Heste

Special Offer @ Amazon Check Price Now !

Note. Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants.

See Also : Backpack Blower Review Vacuum Cleaner Reviews